One Artsy Mama One Artsy Mama One Artsy Mama One Artsy Mama blog lovin'
Showing posts with label wedding. Show all posts
Showing posts with label wedding. Show all posts

March 25, 2013

Burlap and Button Flowers

When I got married eleven and a half years ago, there was {sadly} no such thing as Pinterest!  My mom and I did make our centerpieces and our favors, and we did a lot of the decorating ourselves, but there's so much more I could do now with the vast wealth of inspiration out there in Pinterest-land and the blogosphere! 

Luckily, as you may recall, I have a friend getting married in October, which gives me a chance to wedding-craft vicariously through her!  My friend Sara and her fiancee Michael chose red and silver as their colors, and they are going for a country/rustic feel.   After making her some Mr. and Mrs. signs and a sweetheart table centerpiece, I decided to try making some table numbers to go along with her colors and theme.  My favorite part of the project is the Burlap &  Button flowers, which can also be used on a wreath, as napkin holders, or as a pin {even if you're not a bride-to-be}!

burlapcenterpiecepinnable2

Here's what you need:

For the flowers: 
- burlap 
- felt 
- scissors 
- hot glue 
- buttons 
- pearls 
- clips or pins

For the rest of the table numbers:
- David Tutera table number stands and cards
- adhesive vinyl

Specific button type I used: 
"Marybeth" {10 mm}

STEP 1: Find a circular object that's the size you want your finished flower to be.  Trace it on paper to create a pattern, then use it to cut out one felt circle and eight burlap circles.
burlapflower1
STEP 2: Fold each circle in half, then in half again to form a triangle.  Glue four of the triangles to the felt circle, as shown.
burlapflower2
STEP 3: Repeat, gluing the other four circles on top, staggering them so that they cover the seams between the bottom four triangles.
burlapflower3
STEP 4: Fancy it up by adding your button{s} and pearls to the center of the flower.  At this point, you can also glue a clip or a pin to the back.
burlapflower4

To create my table number, I covered the existing black number with adhesive vinyl that matches Sara's colors.  Then, I inserted the number into the stand, and clipped my burlap flower to the wire on the stand.  You could also glue the flower on, but this way the flower is reusable and so are the rest of the pieces.

burlapflower5

To coordinate with Sara's colors and the theme even more, I glued a row of the Marybeth buttons around the base of the table number stand.

burlapflower6

I really love the way it turned out!  Formal and elegant, but with a rustic feel too.

burlapbeauty

Not planning a wedding?  Me neither.  So you and I can just make up these flower clips/pins and wear them!  They look great on a denim jacket or shirt, and I'd be they're cute clipped on a headband too!  Or, glue a few onto a wreath and you have some shabby chic door decor, all made with some burlap and buttons!

burlappin

What do you think?  Where would you use a burlap and button flower {or two or ten}?

Hugs & Glitter,
siggy
Pin It!

March 5, 2013

Head Table Centerpiece - David Tutera Bridal

So, those of you who planned your wedding more than two years ago, do you ever find yourself browsing Pinterest and thinking, "Where were you when I needed you?!"   

Seriously.  

There are so many cute, funny, gorgeous, amazing wedding ideas on there that I just wish I would have seen when I was planning my own special day.  But, alas, at least I get to live vicariously through my friends Sara and Kristen who are engaged and in the midst of their pinning and planning.  Today, I want to share with you a special project I made for Sara and her fiance Michael to use on their head table using supplies from David Tutera Bridal.


You see, I was fortunate enough to receive a box of ah-ma-zing supplies from the David Tutera bridal line, which you can find at Michaels and other crafty places.  It was all I could do not to squeal when I saw all the sparkles!!  Hair clips, table numbers and stands, adhesive rhinestones, miniature lights...eeeeek!  So. fun.

david tutera, bridal


I contacted Sara and Kristen and invited them over to look at all the fun products and see which ones were the best fit for their themes and styles.  Sara stopped by first and fell in love with all the sparkles too.  At the reception, she plans to have her head table set up with a round table in the middle for the bride and groom, and rectangular tables coming off of each side for the rest of the bridal party.  She was in need of a pretty centerpiece for that round table, which is where I {and David Tutera} come in!


Materials:
from the David Tutera collection
- "Bling on a Roll"
- Faceted Diamond Charms
- Crown pins

other materials
- square glass vase
- eight large silk roses
- styrofoam ball
- hot glue 
- adhesive vinyl & cutting machine

STEP 1: Fill vase with diamond charms.

STEP 2: Measure vase and cut the appropriate amount of "bling on a roll." Adhere bling to vase.
I used adhesive dots for that part so that it would be removable, but you can also use glue or double sided tape.

STEP 3: Create and adhere vinyl monogram.
My friend's new last name will be Eckard, so I cut out an "E" from dark red vinyl.  Once it was cut, I placed transfer tape on top to help peel it off and adhere it to the vase.
 STEP 4: Create flower arrangement.
I used eight giant roses and a small styrofoam ball.  I cut the blooms from their stems and glued them into the styrofoam.  Then, I added the crown pins for a sparkly, formal effect.  I left a small part of the ball uncovered at the bottom so that it would sit in the vase.
 STEP 6: Place floral ball in vase.

This project was seriously easy to do.  No flower arranging skills necessary, just glue those suckers onto the ball until it's covered!  My kind of project!  And after the wedding is over, Sara and Michael can use it as a centerpiece in their new home.  I'm actually a little sad to let it go...it looks quite pretty on my table {even though the "E" is completely irrelevant for our family}.  Maybe I'll just have to convince hubby that we need a vow renewal...

If you're planning a wedding, helping an engaged friend plan a wedding, renewing your vows, or just like to have some bling in your life, be sure to check out all the gorgeous David Tutera Bridal products.


Hugs & Glitter,


Pin It!

February 18, 2013

Mr. and Mrs. Signs {and a vinyl giveaway}!

My friend Sara is getting married this October!  

Actually, I first met Sara when she was a 9th grade student in the English I class I was teaching {back in the pre-mama, pre-blogger days.}  We've kept in touch, and she's helped us out by babysitting LC from time to time.

But it makes me feel better and less old to just call her my friend, so we'll just use that, shall we?
Anyway, she saw some cute "Mr." and "Mrs." signs on Pinterest and asked me if I'd make her a pair to go on the chairs at the reception.  She chose the size for the signs and the font she wanted me to use, and told me her colors were red and silver.  Here's what I came up with:

wedding signs, Mr. and Mrs. signs, wooden signs, vinyl signs, Silhouette

Materials:
- 6x12 pieces of wood
- dark red adhesive vinyl {I used Oracal 631, provided by Expressions Vinyl}
- acrylic paint
- ribbon
- scissors, hot glue
- sandpaper
- Silhouette Cameo and Silhouette Studio {although you could also cut by hand}

STEP 1: Paint wood dark brown.  I know, if you want the signs to be ivory or white, it's counter-intuitive, but this is what will show through when you distress the wood.  Let it dry completely before moving on.  Trust me.

STEP 2: Paint over the brown with your desired color.  It took me 3 coats to completely cover the brown.  Just be patient even when it feels like the paint will never dry.

STEP 3: Cut your vinyl.  Sara chose the Scrap Calligraphy font, so I typed up the Mr. and Mrs. and sized them to the wood.

STEP 4: Use transfer tape to adhere vinyl to your signs.  All you do is peel off the backing of the transfer tape and put the sticky side onto your vinyl.  When you peel it away, the cut vinyl will come with it.  Then you can use the lines to help you get your words/images straight and properly positioned onto the wood.  Rub firmly, then peel the transfer tape away and the vinyl will be adhered in place.  The photos below are a sneak peek from another project I'm making for Sara's wedding, but they show you the process of using the transfer tape.


STEP 5: Distress signs with sand paper. Rub lightly around the edges until the top coats of paint sand off and you can see the dark brown starting to show through.



STEP 6: Glue ribbon to the back of each sign.




Sara and Michael both loved the finished product {whew!}.  Now, they just have to wait until October to use them!  Isn't she the cutest bride-to-be?  Congratulations, Sara, and thanks for letting me help you make your special day extra-special.


Meanwhile, I have to note that the Oracal 631 vinyl as well as the transfer tape from Expressions Vinyl were so easy to work with and made such a great-looking finished product.  Plus, my order arrived very quickly, which allowed me to get right to work.  {This is important when you're an impatient creator like me!} If you're looking for high-quality, affordable vinyl, I definitely recommend Expressions Vinyl as a place to buy it.  Not only do they have the kind I used, they also have glossy, permanent outdoor, and specialty vinyls, including iron on and t-shirt vinyl.  There are a variety of sizes available and a huge variety of colors.

And today, they're offering one lucky reader $25 credit to their online store!  Rafflecopter will walk you through the entry process; good luck!

a Rafflecopter giveaway
Pin It!
Related Posts Plugin for WordPress, Blogger...
Pin It button on image hover